Release Version 0.5.1 Beta

PagePosted on July 26, 2012 Comment53 Comments
  • Fixed an error where loading config files from previous versions would crash the application.
  • Added a RAM sensor for used memory.

Release Version 0.5.0 Beta

PagePosted on July 25, 2012 Comment8 Comments
  • The Open Hardware Monitor has a new remote web client developed by Prince Samuel. This allows to monitor the sensor values remotely from any web browser.
  • Added support for Intel Ivy Bridge based CPUs.
  • Added support for RAM hardware and implemented sensors for load and available memory.
  • Added support for SSDs with a controller from Micron.
  • Corrected the Sandforce SSD identification.
  • Added a write amplification sensor for Sandforce based SSDs.
  • Added a load sensor for hard drives that shows the used space in percent.
  • Added temperature offset parameters to all hard drive temperature sensors.
  • Added support for ITE IT8705F and IT8771E super I/O chips.
  • Added support for Nuvoton NCT6779D super I/O chips.
  • Andrey Mushatov added support for Fintek F71808E super I/O chips.
  • Added mainboard specific configurations for the following ASUS maiboards: P6T, P8Z68-V PRO, P8Z77-V, P9X79.
  • Added mainboard specific configurations for the following Gigabyte mainboards: EX58-UD3R, G41M-Combo, G41MT-S2, G41MT-S2P, GA-MA770T-UD3P, GA-MA785GM-US2H, GA-MA78LM-S2H, GA-MA790X-UD3P,
  • H55-USB3, H55N-USB3, H61M-DS2 REV 1.2, H61M-USB3-B3 REV 2.0, H67A-USB3-B3, P55A-UD3, P67A-UD3-B3, P67A-UD3R-B3, Z68A-D3H-B3, Z68AP-D3, Z68X-UD3H-B3.
  • Added support for reading more than one T-Balancer fan controller.
  • Added an option to enable/disable the monitoring of any hardware group (Mainboard, CPU, RAM, GPU, Fan Controllers, HDD).
  • Added a simple way to customize the sensor desktop gadget background: If any of the files gadget_background.png, gadget_image.png, gadget_foreground.png, gadget_bar_background.png or gadget_bar_foreground.png are present in the working directory then these images are used instead of the default ones.
  • The temperature in the system tray icons are now shown correctly in Fahrenheit when using Fahrenheit as temperature unit.
  • Fixed the problem of missing tray icons after Windows startup.
  • Fixed the system tray icon font scaling for Windows XP.
  • Improved the data compression for storing the recorded sensor values in the configuration file.
  • Changed the license to the Mozilla Public License 2.0 and update the licensing information.

Release Version 0.4.0 Beta

PagePosted on January 8, 2012 Comment24 Comments
  • Added an option to show the sensor-plot in a separate window or on the right of the tree-view.
  • Added support for saving and restoring the sensor history as shown in the plot for the last 24h.
  • Added a context menu to the plot which allows the user to configure the time window for plotting.
  • Added code to save and restore the plot sensor selection.
  • Added support for AMD family 12h (Llano) and 15h (Bulldozer) CPUs.
  • Added support for package level temp sensors on new Intel Sandy Bridge CPUs.
  • Added support for Intel CPU power sensors (package and cores).
  • Improved the CPU load sensors. The values displayed for the load per core and the total load should now be more accurate.
  • Rewritten the SMART HDD and SSD monitoring code based on a patch by Roland Reinl. The report now contains a list of all SMART attributes with the labels as identified by the Open Hardware Monitor.
  • Added support for SMART total host writes and total host reads sensors on SSDs.
  • Further restricted the identification for Indilinx SSDs to prevent Maxtor HDDs to be identified as Indilinx SSD.
  • Added the hard drive firmware version to the report.
  • Added support for the Fintek F71889AD super I/O chip.
  • Added support for the ITE IT8772E super I/O chip.
  • Added support for fan control on the NCT677X super I/O chips.
  • Added fan control for Nvidia GPUs based on a patch by Christian Vallières.
  • Extended the identification list of mainboard manufacturers.
  • Added mainboard specific configurations for the Gigabyte Z68X-UD7-B3, ASUS P8P67, ASUS P8P67 EVO, ASUS P8P67 PRO and Shuttle SH67Hx mainboards.
  • Added a third decimal place for voltages to the displays.
  • Optimized the memory allocation behavior of the GUI.

Release Version 0.3.2 Beta

PagePosted on May 19, 2011 Comment56 Comments
  • Fixed the message box that is shown when the Open Hardware Monitor is started without extracting all files from the archive.
  • Fixed a spelling error in the report submitting dialog.

Release Version 0.3.1 Beta

PagePosted on May 18, 2011 CommentComments Off
  • Added an option to edit hardware names in the user interface.
  • Voltages are now shown with three decimal digits in the main user interface.
  • Added support for the IT8728F super I/O chip used on Sandy Bridge mainboards from Gigabyte.
  • Fixed a few problems in the NCT677X super I/O implementation.
  • Added a mainboard specific configuration for the ASUS P8P67-M Pro, Gigabyte P67A-UD4-B3 and Gigabyte H67A-UD3H-B3.
  • Fixed the bus and core clock reading on AMD Phenom II X6 CPUs with Core Performance Boost.
  • Fixed the ATI GPU fan control. The settings now restore correctly to the default on all systems.
  • Fixed a few exceptions that forced the Open Hardware Monitor to terminate.
  • Added a few tweaks to the main user interface to get better font rendering when ClearType is disabled in Windows.
  • Added code to move the gadget back to the visible part of the screen when its current position is no longer visible.
« Older Entries
Newer Entries »